The Honeywell HHM Series housing mount adapters are designed to mount the
HHMW13 Wall Mount for the HHC12 environmental camera housings to corners
and poles. The adapters can support up to 63.5 lb (25 kg) and are constructed
of die-cast aluminum with an epoxy powder coating, making them corrosion
resistant.
The HHMW13 wall mount features an integrated ball joint that allows easy
positioning of the HHC12 environmental housing. The HHMW13 can be mounted
to a standard pole using the HHMPMA pole mount adapter or mounted to the
outside corner of a building using the HHMCMA corner mount adapter.
Market Opportunities
The Honeywell HHM Series of camera mount adapters are designed for mounting
the HHC12 Series of environmental housing mounts to corners of buildings or
freestanding poles. These adapters can be used indoors and outdoors and are
suitable for a variety of applications such as parking lots, building perimeter
surveillance, entranceways, and driveways.
Features
www.honeywellvideo.com
HHM Series
Die-cast and aluminum construction
Epoxy powder coated finish for
corrosion resistance
Easy to install
Maximum load 63.5 lb (25 kg)
Contemporary design
Low cost
HOUSING MOUNT ADAPTERS
HHMPMA
Pole Mount Adapter
HHMCMA
Corner Mount Adapter

ҳ
HHM Series
L/HHMADPD/D
May 2007
2007 Honeywell International, Inc.
Honeywell Security
Honeywell Video Systems
2700 Blankenbaker Pkwy, Suite 150
Louisville, KY 40299
1.800.796.CCTV
www.honeywell.com
www.honeywellvideo.com
SPECIFICATIONS
Ordering
HHMPMA
Pole Mount Adapter for the HHMW13 Wall Mount
HHMCMA
Corner Mount Adapter for the HHMW13 Wall Mount
NOTE:
Honeywell reserves the right, without notification, to make changes in product design or specifications.
1.57"
(40 mm)
4.19"
(106.5 mm)
M6
TAP
2.41"
(61.3mm)
0.31"
(8mm)
4.80" (122 mm)
Side View
Bottom View
Top View
1.47"
(50mm)
1.57"
(40 mm)
3.35"
(85mm)
3.19"
(81 mm)
4.72"
(120 mm)
1.57" (40 mm)
1.5" (38 mm)
3.19"
(81 mm)
4.17"
(106 mm)
4.72"
(120 mm)
3
.9
4
"
(1
0
0
m
m
)
3
.3
5
"
(8
5
m
m
)
M6
TAP
R70
1.57i
(40 mm)
4.72"
(120 mm)
7.09" (180 mm)
2
.8
3
"
(7
2
m
m
)
4
.7
6
"
(1
2
1
m
m
)
0.31"
(8 mm)
1.77"
(47 mm)
1.97"
(50 mm)
0.88"
(22.4 mm)
Top View
Side View
Bottom View
Mechanical
HHMPMA
Dimension
See diagrams
Weight
1.64 lb (0.75 kg)
Maximum Load
63.5 lb (25 kg)
Construction
Mount: Die-cast and aluminum
Finish: Light gray, polyester powder
coating
Enclosure
Mounting
Ten (10) M16 x 15 mm hex head machine
screws (supplied)
Two (2) M10 x 90 mm hex head machine
screws (supplied)
Two (2) M10 hex nut (supplied)
Mechanical
HHMPMA
Dimension
See diagrams
Weight
.098 lb (0.45 kg)
Maximum Load
63.5 lb (25 kg)
Construction
Mount: Die-cast and aluminum
Finish: Light gray, polyester powder
coating
Enclosure
Mounting
Ten (10) M16 x 15 mm hex head machine
screws (supplied)

ҳ