……………………………………………………………….
PDS/ClearSec G/Issue 1 02.01
1
……………………………………………………………
……
C
le
a
rS
e
c
G
ClearSec G
Internal and External Full Height Security Turnstile
Rotor Elements
: G90
4N
O
G120
3N
O
Drive
:
Hand operated
Orientation
:
Pass Left or Pass Right
Materials
:
Casework:
304 Grade Grained Stainless Steel.
(EN10088-2 Grade 1G/2G)
Glass Infills:
6.4mm 3 ply Laminated Glass Panels
Turnstile Roof:
304 Grade grained stainless steel.
(EN10088-2 Grade 1G/2G)
Rotor Arms:
316 Grade Satin Polished Stainless Steel
EN10088-2 Grade 1K/2K).
Rotor Column:
100mm dia. Mild Steel Painted Black
Polyester Powder Coated
Function
:
Passage in both directions, electronically controllable.
Head Mechanism
: Control of the Turnstile operation is achieved by an Electro-mechanical head
mechanism and is silent in operation. It comprises:-
•
A positive action lock which prevents two passages at one time
•
A self-centering mechanism to ensure complete rotation of the head to the
reset position.
•
An anti backup device prevents reverse rotation once the head has moved
30
O
from its rest position.
•
A hydraulic damper to ensure smooth and quiet operation
Operating Modes
: The mechanism can be configured to operate in two standard modes.
•
Normally Closed – The mechanism is locked until a valid authorisation
signal is received.
•
Normally Open – The mechanism is permanently unlocked and will only lock
if passage is attempted without a valid authorised signal. In this mode the
MTBF is increased from 1.5 to 2.5 million cycles and increases passage
throughput speeds.
Power Failure
:
In the event of an emergency or isolation of power supply, unit may be
configured to fail-safe i.e. rotor freely rotates or fail-lock, i.e. rotor locks. Either
option is available in both or one direction. Choice must be denoted at time of
order placement.
Fire Alarm - Input facility available for voltage free contact supplied by others to
effect fail sate.
Note: Head mechanism fail state will be the same as power failure choice.
Interface
:
The mechanism is controlled by means of an LCM02 microprocessor control
logic with the following features: -
•
One input for opening/locking the mechanism in each direction
•
Two protected outputs for control of the opening/locking solenoids
•
Four protected outputs for piloting way mode indicators.
•
Two 0V output relays indicating availability of use in either direction.
•
Two 0V outputs to count passage in either direction
The logic is protected against short circuits, overloads and polarity inversion.
Additional detailed information is available upon request.
Product Description
ClearSec is an alternative
approach to full height
security from our Control
range of products for
internal or external use.
Choice of materials allows
complete integration into
any environment and 90 or
a 120 degree rotor for
easier entry.
Users include
•
Government
•
Retail
•
Finance
•
Telecommunications
•
Information
Technology
•
Banking
•
Publishing
•
Leisure
•
Petrochemical
•
Pharmaceutical
•
Education
Product Data Sheet
ISO 9001
FM 13503
Control

ปปาณ
……………………………………………………………….
PDS/ClearSec G/Issue 1 02.01
2
Installation Examples
Status Lights
:
50mm diameter LED display Status Lights flush mounted within the ClearSec uprights. The Green
badge symbol is continuously illuminated indicating passage is available. Upon authorisation a Green
Arrow will illuminate in the direction of passage authorisation whilst in the opposite direction a Red
cross symbol will illuminate to indicate the unit is not available for use or is already in use..
Walkway Lights
:
A 24 volt halogen walkway downlight is included as standard, which will be illuminated continuously.
Unit has an adjustable time out facility if required i.e. Go signal will be cancelled if passage through
turnstile is not completed within pre-set time. The standard default is 8 seconds adjustable via
parameter change.
Power Supply
:
115/230 Volts AC 5/60 Hz
Power Rating
:
N/C – Standby or Passage 50Va (Alarm Condition 50Va)
N/O – Standby or Passage 5Va (Alarm Condition 50 Va)
Logic Voltage
:
24 Volt DC
Installation Details
:
ClearSec G models are delivered as a partly assembled kit of parts, which may require lifting gear for
off loading.
Approx. weight 400 kg. depending on spec.
Models Available
ClearSec G – Internal/External full Height Security Turnstile
•
G90/G120
Rotor - 316 stainless steel straight type arms and a black finished mild steel rotor column.
•
G90SL/G120 SL
Rotor - 20mm thick acrylic slats with textured mid and bottom slats and black painted mild steel stator bars.
•
G90FP/G120FP
Rotor - Full length 9.5mm thick solid polycarbonate panel for internal use only.
Important Note
- The Full length solid polycarbonate rotor panels should only be supplied as fail-safe to prevent trapping of pedestrians in
the “dead” area during power failure. If fail lock is specified the written agreement of the customer to this configuration must
be obtained
before the ClearSec G is supplied by Gunnebo Mayor.
Accessories and Optional Extras
Alternative Materials and Finishes
•
Casework finished with polyester powder coated semi-gloss paint.
•
Casework manufactured from 316 grade stainless steel EN10088-2 Grade lK/2K
•
Tinted Glass.
•
Other Glazing types.
•
Grained Stainless Steel clad infill panels to replace standard glazed panels.
•
Demountable roof fascia panels enabling access for reduced ceiling clearance of minimum 200mm.
Card Reader Mounting
•
Readers can be surface mounted on casework upright.
•
Card Reader Mounting Pedestals.
Battery Back Up
•
Maintains all 24 volts control facilities for 500 operations or 4 hours whichever the sooner.
Push Button Control
•
Simple remote console to house ClearSec pushbutton overrides.
•
Remote console to specific requirements.
•
Casework mounted pushbutton.
Additional Interface
•
RS 485 Serial Interface.

ปปาณ
……………………………………………………………….
PDS/ClearSec G/Issue 1 02.01
3
Flow Rates
Reader Device
Number per minute
Insertion type
12
Insertion type with PIN code keypad
7.5
Swipe type
15
Swipe type with PIN code keypad
8.5
Proximity ‘Hands Free’
17
•
Please note the figures are approximate and must be confirmed with Gunnebo Mayor Ltd.
Figures quoted are for one person per complete passage per walkway and per minute.
It is assumed the access control authorisation response is instantaneous.
Flow rates will increase with mutiple passage use.

ปปาณ
……………………………………………………………….
PDS/ClearSec G/Issue 1 02.01
4
Note: In pursuit of its policy of continuous refinement and improvement, Gunnebo Mayor Ltd. reserves the right to modify design and details.
A COMPANY WITHIN THE GUNNEBO GROUP
……………………………………………………………………………………………………
United Kingdom
Gunnebo Mayor Ltd. Bellbrook Business Park, Uckfield, East Sussex, TN22 lQQ.
Tel +44 (0) 1825 761022
Fax +44 (0) 1825 763835
Gunnebo Mayor Ltd. Orient House, Newton Street, Hyde, Cheshire, SK14
4RX
Tel +44 (0) 161 882 5900 Fax +44 (0) 161 882 5910
www.gunnebomayor.com
GERMANY
Gunnebo Entrance Control GmbH
Diagonalstrasse 41, D-20537
Hamburg
Tel
+49 (0) 40 47 11 30 0
Fax
+49 (0) 40 47 11 30 79
SPAIN
Gunnebo Entrance Control
BBC, Comte d’Urgel 143, Iola 08036,
Barcelona
Tel
+34 93 452 59 56
Fax
+34 93 451 56 53
DENMARK
Gunnebo Protection A/S
Division Entrance Control
Erhvervsparken 3, DK-4621 Gadstrup
Tel
+45 46 19 14 66
Fax
+45 46 19 14 55
ITALY
Gunnebo Italdis SpA
Via A Volta 15 - IT 38015
Lavis (TN)
Tel
+39 0461 248 900
Fax
+39 0461 248 999
UNITED KINGDOM
Gunnebo Mayor Ltd
Bellbrook Business Park, Uckfield,
East Sussex, TN22 lQQ
Tel
+44 (0) 1825 761022
Fax
+44 (0) 1825 763835
HEAD OFFICE SWEDEN –Gunnebo Entrance Control AB, SE-590 93, Gunnebo.
Tel +46 (0) 490 89000, Fax +46 (0) 490 23889
FRANCE
Gunnebo Entrance Control SARL
Zone d’Activites Le Mandinet,
20 Rue des Campanules
F-77185, Lognes
Tel
+33 (0) 1 64 80 14 40
Fax
+33 (0) 1 64 80 14 39
NORWAY
Gunnebo Troax A/S
Division Entrance Control
Postboks 179, Kalbakken N-0903, Oslo
Tel.
+47 22 80 42 00
Fax
+47 22 80 42 01
USA
Gunnebo Omega Inc
5056 Commercial Circle, Suite E,
Concord, California, CA 94520
Tel
+01 925 609 6339
Fax
+019256030810
HONG KONG
Gunnebo Entrance Control
Room 2312, C.C. Wu Building,
302-308 Hennessy Road, Wanchai.
Tel
+852 2882 8337
Fax
+852 2523 7880
SWEDEN
Gunnebo Entrance Control
Box 500, Kumla Gardsvag 33F, 145 63
Norsborg
Tel
+46 (0)8 53 17 15 75
Fax
+46 (0) 8 53 18 85 39

ปปาณ