……………………………………………………………….
PDS/HiSec9E/Issue 1 02.01
1
……………………………………………………………
……
H
iS
e
c
9
HiSec9
Security Booth for Internal or Semi External Use
Technical Specification
Drive:
Motorised
Orientation:
Walkway functions as both Entry and Exit
Materials
:
Framework:
40 x 10 x 3mm RHS mild steel
Cladding:
4mm mild steel,
painted polyester powder coated
textured finish to Gunnebo Mayor RAL colour selection.
Glazing:
•
Lite -
13mm Laminate Safety Glass.
(6mm Glass / 0.75mm Interlayer / 6mm Glass)
•
Bullet Proof -
27mm Laminate Safety Glass - C2 specification.
(AP/B-AC/A to UNI 9186-9187 standards)
Standard Colours
: Black - 9005, Grey - 7001, Blue 5010, Brown - 8019 and Red - 3000.
Function:
Passage in both directions, electronically controllable.
Mode of
The doors are always locked shut in the rest position. An authorised signal
Operation:
opens the first door allowing the user to step into the booth where a presence is
detected via means of checking weight increase on the floor, side panels and doors.
The first door then closes and the second door opens, thus allowing the user to pass
through. The second door shuts after the unit has been vacated which also resets
the system.
Prevention of
Electronic weight sensing
determines if more than one person is present within
Multi Person
the booth. The booth is set with a predetermined, but adjustable anti hostage
Entry:
threshold (upper and lower weight limit) of 120Kg as standard. As an authorised
user stands in the booth, it confirms acceptance of the occupant and authorises
the door to close. Should the measured weight not be authorised, i.e. more than
one person present or over weight non-permitted additional baggage, a vocal
synthesiser will ask the occupants to leave the booth. Once the occupants have
vacated the booth the door will close and the system will automatically reset.
Standard upper and lower weight limits range from between 1 - 140Kg.
For heavy requirements a maximum setting of 160Kg is also available.
Any object left inside the booth will be detected during the reset sequence. An
alarm will be activated and the object will have to be removed by manually
opening the secure side door. 250grms min.
Passage
As authorised passage occurs the doors to open and close in sequence. To
Confirmation:
confirm this operation separate outputs given for each door as it closes to confirm
the movement of the occupant from one side of the booth to the other.
Battery Back Up:
Battery Back Up is supplied as standard. It will allow the booth to operate on
continuous cycle of approx. 2 hours, if batteries are fully charged and maintained.
Power Failure:
In the event of a power failure, isolation or after the BBU has been depleted,
the outer, un-secure door will fail safe, i.e. un-locked and can be manually pushed
open. The inner, secure door will fail lock and is held in place via a lever system
situated behind a locked panel above the door on the secure side of the
installation. The inner door can be manually opened by rotating a knob located
behind the lockable service panel in the top mechanism section of the booth.
Emergency:
In the event of emergency a signal can be sent to the booth controller to
command either, the secure, non-secure or both doors to open.
Fire Alarm – Input facility available for 0V contact supplied by others to effect the
specified emergency fail state.
Product Description
The HiSec9 security booth
offers the highest level of
access control with
presence, passage and
weight detection as
standard.
The HiSec9 is also
suitable for wheelchair
security access.
Users include
•
Head Offices
•
Banking
•
Computer Suites
•
Telecommunications
•
Information
Technology
•
R and D
•
Government
•
Military
•
Security Publishing
•
Law Enforcement
Product Data Sheet
ISO 9001
FM 13503
Control

ปปาณ
……………………………………………………………….
PDS/HiSec9E/Issue 1 02.01
2
Installation Examples
Safety:
Both leading
and trailing
door edges and framework are fitted with pneumatic safety edges that reverse the motor
to re-open the door upon detection of an obstruction. The door fully opens to allow the obstruction to be removed
after which it attempts to re-close, should the obstruction remain it will repeat the opening and closing sequence
for sixty seconds after which time the booth controller ‘times out’ and sounds an alarm on the remote console.
(One remote console is supplied as standard.)
The torque setting of the door leaf is set at 8 to 12Kg, when a higher value is detected the leaf will slow down,
stop and automatically reverse to the full open position. The motor is also fitted with over current protection
should an obstruction be detected.
Should a person remain within the booth for longer than sixty seconds, with the power switched off, the non-
secure door will automatically open to allow the person to vacate the booth.
Intercom
:
Mounted as standard on all models.
Interface:
The booth is controlled via a microprocessor activated by 0V contacts provided by a combination of either, card
reader, push button or radar device. As standard the following features are available;-
•
Eight inputs
•
Eight 0V programmable outputs of which three are used for entry, exit and passage confirmations.
•
Two remote consoles.
•
Alarm contact for telephone.
•
One serial port for RS232.
Note
- The interface program can be customised, therefore it is important to confirm all interface requirements
when placing an order.
Power Supply:
115 or 230V AC 50/60Hz
Power Rating
:
330VA max.
Control Voltage:
24V dc
Installation:
Internal or Semi External (under canopy), 150mm is required over the top of the booth for non routine
maintenance/adjustment. Secure demountable over panel required if installed on wall centreline for access to
electrical mechanical components during servicing.
Servicing:
Standard servicing is from the secure side of the booth via a lockable panel above the secure door.
Temperature
-10
O
C to 55
O
C
Range:
Delivery Details:
The standard HiSec9 range is delivered fully
assembled and will
require specialist lifting gear for off loading.
Dependent upon specification the weight of the booth ranges from 1000 to 1300Kg, therefore sufficient access
space must be made available from the point of off loading to installation locality.
Model
Nett Weight
Packed Weight
(Kg)
(Kg)
HiSec9
770
1020
HiSec9LM
810
1060
HiSec9B
1000
1250
HiSec9BM
1040
1290

ปปาณ
……………………………………………………………….
PDS/HiSec9E/Issue 1 02.01
3
Models Available
HiSec9 Security Booth:
•
Model HS9L
Electrically controlled in both directions,
13mm 3 ply Safety Glass, Weight Sensing, Internal Light
and Remote Console.
•
Model HS9LM
Electrically controlled in both directions, 13mm 3 ply Safety Glass, CEIA PN8 Metal detection,
Weight Sensing, Internal Light and Remote Console.
•
Model HS9B
Electrically controlled in both directions,
27mm 3 ply Bullet Proof Glass , Weight Sensing, Internal
Light and Remote Console.
•
Model HS9BM
Electrically controlled in both directions, 27mm 3 ply Bullet Proof Glass, CEIA PN8 Metal detection,
Weight Sensing, Internal Light and Remote Console.
Standard Accessories and Optional Extras
Alternative Materials, Finishes and Custom Design
(Please contact Gunnebo Mayor for suitability and costs)
•
Casework available in other materials, i.e. Stainless Steel, Brass etc.
Note
- A lacquered finish is recommended for some materials,i.e. Brass, please contact Gunnebo Mayor Technical
department for more information.
•
Other paint colours and finishes.
•
Alternate glazing specifications.
Cardreader Mounting
(Please refer to Gunnebo Mayor for feasibility)
•
Casework surface mounting of card readers.(Card readers are customer supplied)
•
Cardreader Pedestals.
Push Button Control
•
Simple remote Push Button Console.
•
Remote console to specific requirements.
•
Single pushbutton casework mounted.
Demountable Casework.
•
Delivered in part assembled components for site assembly that allows the unit to be positioned in areas of restrictive space.
Additional assembly site time should be allowed for assembly of the unit and the fixing of the claddings to the internal steel
support frame. (When ordering suffix standard code with a D to denote demountable option.)
Metal Detection
:
•
Should an attempt be made to enter the booth with a weapon or metal object similar in size, it will be identified and the
secure door will be inhibited from opening. The non-secure door will remain open and the vocal synthesiser will request the
occupant to leave the booth. After the occupant has left the door closes and resets the system ready for a new passage.
(CEIA PN8 fitted as the standard option.)
Weight Banding
(Please refer to Gunnebo Mayor for feasibility)
•
A user is allocated to a predetermined weight band , as they stand in the booth the weight sensing gives a digital output to
the access control system that verifies acceptance of the user. The access control system confirms acceptance and gives
an output signal to the booth to shut the door and activate the operation sequence.
Should the measured weight not be authorised, i.e. more than one person or unauthorised additional baggage a vocal
synthesiser will request the occupant/s to leave the booth.
A maximum of eight weight bands is available, ranging from 1 to 140Kg.
•
Band 1
1 - 55Kg
Band 2 56 - 65Kg
•
Band 3
66 - 75Kg
Band 4 76 - 85Kg
•
Band 5
86 -100Kg
Band 6 101 - 115Kg
•
Band 7
116 - 130Kg
Band 8 131 - 140Kg
The facility can also be achieved via a serial connection.
This option is subject to suitability of the access control system, please contact Gunnebo Mayor Technical Department for
assistance.
•
Additional weight band interface to transmit digital data in analogue form.
Model
N
O
Packages
Total Packed Weight
(Kg)
HiSec9D
2
1370
HiSec9LMD
2
1410
HiSec9BD
2
1600
HiSec9BMD
2
1640

ปปาณ
……………………………………………………………….
PDS/HiSec9E/Issue 1 02.01
4
Site Preparation HiSec9 Range
Model HiSec9 with Metal Detection
Model HiSec9
Floor Recess Details
(Non Secure Side)
Low voltage lamp
Metal detection
Voice synthesizer
Pneumatic safety edge
Lockable access panel
* First In/Last Out
keyswitch
(Secure Side)
Bottom cable entry
30mm dia.
IMPORTANT
•
Any horizontal pipe or conduit runs below the HiSec must be at least 140mm below FFL.
•
It is the customers responsibility to ensure the structural integrity and strength of the installation location.
Concrete to BS 5328: 1997 specification, type ST5. Base
to be flat and level to +/-5mm over footprint area. To level
unit during installation use non-metallic shims only.
Floor Recess Details

ปปาณ
……………………………………………………………….
PDS/HiSec9E/Issue 1 02.01
5
Flow Rates
Reader Device
Number per minute
Insertion type
4.5
Insertion type with PIN code keypad
4
Swipe type
5
Swipe type with PIN code keypad
5.5
Proximity ‘Hands Free’
6
•
Please note the figures are approximate and must be confirmed with Gunnebo Mayor Ltd.
Figures quoted are for one person per complete passage per walkway and per minute.
It is assumed the access control authorisation response is instantaneous.
Flow rates will increase with multiple passage use.

ปปาณ
……………………………………………………………….
PDS/HiSec9E/Issue 1 02.01
6
Note: In pursuit of its policy of continuous refinement and improvement, Gunnebo Mayor Ltd. reserves the right to modify design and details.
A COMPANY WITHIN THE GUNNEBO GROUP
……………………………………………………………………………………………………
United Kingdom
Gunnebo Mayor Ltd. Bellbrook Business Park, Uckfield, East Sussex, TN22 lQQ.
Tel +44 (0) 1825 761022
Fax +44 (0) 1825 763835
Gunnebo Mayor Ltd. Orient House, Newton Street, Hyde, Cheshire, SK14
4RX
Tel +44 (0) 161 882 5900 Fax +44 (0) 161 882 5910
www.gunnebomayor.com
GERMANY
Gunnebo Entrance Control GmbH
Diagonalstrasse 41, D-20537
Hamburg
Tel
+49 (0) 40 47 11 30 0
Fax
+49 (0) 40 47 11 30 79
SPAIN
Gunnebo Entrance Control
BBC, Comte d’Urgel 143, Iola 08036,
Barcelona
Tel
+34 93 452 59 56
Fax
+34 93 451 56 53
DENMARK
Gunnebo Protection A/S
Division Entrance Control
Erhvervsparken 3, DK-4621 Gadstrup
Tel
+45 46 19 14 66
Fax
+45 46 19 14 55
ITALY
Gunnebo Italdis SpA
Via A Volta 15 - IT 38015
Lavis (TN)
Tel
+39 0461 248 900
Fax
+39 0461 248 999
UNITED KINGDOM
Gunnebo Mayor Ltd
Bellbrook Business Park, Uckfield,
East Sussex, TN22 lQQ
Tel
+44 (0) 1825 761022
Fax
+44 (0) 1825 763835
HEAD OFFICE SWEDEN –Gunnebo Entrance Control AB, SE-590 93, Gunnebo.
Tel +46 (0) 490 89000, Fax +46 (0) 490 23889
FRANCE
Gunnebo Entrance Control SARL
Zone d’Activites Le Mandinet,
20 Rue des Campanules
F-77185, Lognes
Tel
+33 (0) 1 64 80 14 40
Fax
+33 (0) 1 64 80 14 39
NORWAY
Gunnebo Troax A/S
Division Entrance Control
Postboks 179, Kalbakken N-0903, Oslo
Tel.
+47 22 80 42 00
Fax
+47 22 80 42 01
USA
Gunnebo Omega Inc
5056 Commercial Circle, Suite E,
Concord, California, CA 94520
Tel
+01 925 609 6339
Fax
+019256030810
HONG KONG
Gunnebo Entrance Control
Room 2312, C.C. Wu Building,
302-308 Hennessy Road, Wanchai.
Tel
+852 2882 8337
Fax
+852 2523 7880
SWEDEN
Gunnebo Entrance Control
Box 500, Kumla Gardsvag 33F, 145 63
Norsborg
Tel
+46 (0)8 53 17 15 75
Fax
+46 (0) 8 53 18 85 39

ปปาณ
……………………………………………………………….
PDS/HiSec9E/Issue 1 02.01
7

ปปาณ