……………………………………….……...……………….
………………………………………………………………..
PDS/RevoSec Site Prep/Issue 1 02.01
1
Product DataSheet
100 x 40 rectangular hollow section
8.2mm curved laminated safety
glass
10mm toughened glass wings
secured to the rotor with stainless
steel patch fittings.
Ceiling mounted sensor
Cornice mounted keyswitch
38dia tubular hollow section
Mains power containment facility
Concrete Base to BS 5328:1997
specification. Base to be flat and level
to +/- 5mm over footprint area.
Dimensions to be > 1700 x 1700 x 150
deep min.
IMPORTANT
•
Any horizontal pipe or conduit runs below the RevoSec must be at least 140mm below FFL.
•
It is the customers responsibility to ensure the structural integrity and strength of the installation location.
Floor anchor position, drill 10 dia x 100mm
deep min. (drilled during installation)
Site Preparation RevoSec RVS120/1500FP
(Full Panel rotor shown)

ปปาณ
……………………………………….……...……………….
………………………………………………………………..
PDS/RevoSec Site Prep/Issue 1 02.01
2
Product DataSheet
100 x 40 rectangular hollow section
8.2mm curved laminated safety
glass
10mm toughened glass wings
secured to the rotor with stainless
steel patch fittings.
Ceiling mounted sensor
Cornice mounted keyswitch
38dia tubular hollow section
Mains power containment facility
Concrete Base to BS 5328:1997
specification. Base to be flat and level
to +/- 5mm over footprint area.
Dimensions to be > 1700 x 1700 x 150
deep min.
IMPORTANT
•
Any horizontal pipe or conduit runs below the RevoSec must be at least 140mm below FFL.
•
It is the customers responsibility to ensure the structural integrity and strength of the installation location.
Floor anchor position, drill 10 dia x 100mm
deep min. (drilled during installation)
Site Preparation RevoSec RVS90/1500FP
(Full Panel rotor shown)

ปปาณ
……………………………………….……...……………….
………………………………………………………………..
PDS/RevoSec Site Prep/Issue 1 02.01
3
Product DataSheet
100 x 40 rectangular hollow section
8.2mm curved laminated safety
glass
10mm toughened glass wings
secured to the rotor with stainless
steel patch fittings.
Ceiling mounted sensor
Cornice mounted keyswitch
38dia tubular hollow section
Mains power containment facility
Concrete Base to BS 5328:1997
specification. Base to be flat and level
to +/- 5mm over footprint area.
Dimensions to be > 1800 x 1800 x 150
deep min.
IMPORTANT
•
Any horizontal pipe or conduit runs below the RevoSec must be at least 140mm below FFL.
•
It is the customers responsibility to ensure the structural integrity and strength of the installation location.
Floor anchor position, drill 10 dia x 100mm
deep min. (drilled during installation)
Site Preparation RevoSec RVS120/1600FP
(Full Panel rotor shown)

ปปาณ
……………………………………….……...……………….
………………………………………………………………..
PDS/RevoSec Site Prep/Issue 1 02.01
4
Product DataSheet
100 x 40 rectangular hollow section
8.2mm curved laminated safety
glass
10mm toughened glass wings
secured to the rotor with stainless
steel patch fittings.
Ceiling mounted sensor
Cornice mounted keyswitch
38dia tubular hollow section
Mains power containment facility
Concrete Base to BS 5328:1997
specification. Base to be flat and level
to +/- 5mm over footprint area.
Dimensions to be > 1800 x 1800 x 150
deep min.
IMPORTANT
•
Any horizontal pipe or conduit runs below the RevoSec must be at least 140mm below FFL.
•
It is the customers responsibility to ensure the structural integrity and strength of the installation location.
Floor anchor position, drill 10 dia x 100mm
deep min. (drilled during installation)
Site Preparation RevoSec RVS90/1600FP
(Full Panel rotor shown)

ปปาณ